Tell Me More Electrical Safety-SMART! Home

Electricity FAQ (Frequently Asked Questions)

Need to write a report about electricity? Or just want to know more about some aspect of electricity that has caught your interest? You've come to the right place. Simply click on the questions below, and you'll be on your way!

  1. What is electricity?
    Electricity is a form of energy that starts with atoms. Atoms are too small to see, but they make up everything around us. An atom has three tiny parts: protons, neutrons, and electrons. The center of the atom has at least one proton and one neutron. At least one electron travels around the center of the atom at a great speed. Electricity can be created by forcing electrons to flow from atom to atom.

    Top of Page

  2. How is electricity generated?
    Most electricity used in the United States is produced at power plants. Various energy sources are used to turn turbines. The spinning turbine shafts turn electromagnets that are surrounded by heavy coils of copper wire inside generators. This creates a magnetic field, which causes the electrons in the copper wire to move from atom to atom.

    Top of Page

  3. How does electricity travel?
    Electricity leaves the power plant and is sent over high-power transmission lines on tall towers. The very strong electric current from a power plant must travel long distances to get where it is needed. Electricity loses some of its strength (voltage) as it travels, so transformers, which boost or "step up" its power, must help it along.

    When electricity gets closer to where it will be used, its voltage must be decreased. Different kinds of transformers at utility substations do this job, "stepping down" electricity's power. Electricity then travels on overhead or underground distribution wires to neighborhoods. When the distribution wires reach a home or business, another transformer reduces the electricity down to just the right voltage to be used in appliances, lights, and other things that run on electricity.

    A conductor carries the electricity from the distribution wires to the house meter box. The meter measures how much electricity the people in the house use. From the meter box, wires run through the walls to outlets and lights. The electricity is always waiting in the wires to be used.

    Electricity travels in a circuit. When you switch on an appliance, you complete the circuit. Electricity flows along power lines to the outlet, through the power cord into the appliance, then back through the cord to the outlet and out to the power lines again.

    Electricity travels fast (186,000 miles per second). If you traveled that fast, you could travel around the world almost eight times in the time it takes to turn on a light! And if you had a lamp on the moon wired to a switch in your bedroom, it would take only 1.28 seconds after you flipped the switch for electricity to light the lamp 238,857 miles away!

    Figures used to arrive at the numbers:
    • Speed of light: 186,000 miles/sec
    • Average distance to the moon: 238,857 miles
    • Circumference of the earth: 24,902 miles (equatorial), 24,860 miles (polar)
    Top of Page


  4. How is electricity measured?
    Volts, amps, and watts measure electricity. Volts measure the "pressure" under which electricity flows. Amps measure the amount of electric current. Watts measure the amount of work done by a certain amount of current at a certain pressure or voltage.

    To understand how they are related, think of water in a hose. Turning on the faucet supplies the force, which is like the voltage. The amount of water moving through the hose is like the amperage. You would use lots of water that comes out really hard (like a lot of watts) to wash off a muddy car. You would use less water that comes out more slowly (like less watts) to fill a glass.

    watts = amps × volts
    amps = watts ÷ volts

    Top of Page

  5. How many miles of power lines are there in the United States?
    There are about 240,000 miles of high-voltage transmission lines in the United States and millions of miles of distribution lines carrying electricity to our homes, schools and businesses.

    Top of Page

  6. Do the words "shocked" and "electrocuted" mean the same thing?
    No! Someone can be shocked by electricity and survive. But when we say someone has been electrocuted, it means they have been killed by electricity.

    Top of Page

  7. Why can you sometimes see a spark if you can't see electricity?
    You can't see electricity when it is flowing through a circuit. But if electricity leaves the circuit—like when someone is shocked—you can see a spark. The spark isn't electricity itself. It is a flame that happens when the electricity travels through the air and burns up oxygen particles.

    Top of Page

  8. When a circuit is open, do electrons go backward, or do they just stop?
    Neither! In the wires of an electrical circuit, the electrons are always jiggling around. When a circuit is closed to run an appliance or a light bulb, the electrons jiggle a lot and travel through the wire. When the circuit is open, all the electrons just jiggle where they are—kind of like running in place.

    Top of Page

  9. Why does electricity try to get to the ground, and what does it do when it gets there?
    It's just the nature of electricity to move from an area of higher voltage to an area of lower voltage, if given a path to travel there. The ground is simply the lowest-voltage area around, so if you give electricity a path to the ground, it will take it, no questions asked! When electricity goes into the ground, the earth absorbs its energy.

    Top of Page

  10. Why can a bird stand on a power line and not get shocked?
    It is easier for electricity to keep flowing through the power line than to go through the bird. But if a bird with large wings touches a power line and a tree or power pole at the same time, it provides electricity with a path to the ground, and could be shocked. And if a bird touches two wires at once, it will create a circuit—electricity will flow through the bird and likely electrocute it.

    Top of Page

  11. What is static electricity?
    The shock you feel when you touch an object after walking on carpet is static electricity. When you drag your feet across carpet on a dry day, electrons from the carpet get transferred to your body. (Electrons are parts of the atoms that make up all matter.) If you then touch a piece of metal, such as a doorknob, the electrons jump to the metal and you'll feel a shock.

    Top of Page

  12. What is lightning?
    Lightning is a large discharge of static electricity. During a thunderstorm, clouds build up a charge when small bits of ice collide through a rising and sinking motion within the clouds themselves. The charges created by these collisions eventually fill up the whole cloud. When there is a big difference in charge between the cloud and its surroundings, the cloud discharges a lightning bolt.

    Top of Page

  13. How much energy is in a bolt of lightning?
    One lightning strike can carry between 100 million and 1 billion volts. (100 million volts is the equivalent of 8 million car batteries.)

    Top of Page

  14. Does lightning ever strike fish?
    Yes, it does. Because water conducts electricity, when lightning strikes water, it spreads out along the surface. Any fish near the surface of the water get electrocuted.

    Top of Page

  15. Who holds the world's record for being struck by lightning most often?
    According to Guinness World Records, Roy G. Sullivan, a former United States park ranger, was struck by lightning seven times over the course of his 35-year career. Lightning has burned off his eyebrows, seared his shoulder, set his hair on fire, injured his ankle, and burned his belly and chest.

    Top of Page

  16. Why didn't Ben Franklin get electrocuted when he tied a metal key to a kite string and flew the kite in a thunderstorm?
    Ben Franklin probably did not do his famous kite experiment the way it is usually portrayed. (Franklin never wrote about it himself, and the only description we have of it was written by another scholar, Joseph Priestley, 15 years later.) Franklin believed lightning was a flow of electricity taking place in nature. He knew of electricity’s dangers, and would probably not have risked being struck by lightning by flying his kite during a storm. It is more likely that Franklin flew his kite before the storm occurred, and that his famous key gave off an electric spark by drawing small electrical charges from the air.

    Top of Page

  17. Why shouldn't I use a corded phone or electrical appliance during a thunderstorm?
    There is a very small chance that a lightning strike could surge through phone lines or through the wires of an electrical appliance. If you were to touch a phone or appliance at just that moment, you could be shocked.

    Top of Page

  18. How do batteries create electricity?
    A chemical reaction within the battery forces electrons to move.

    Top of Page

  19. Why don't I get a shock when I touch a battery?
    There is not enough voltage in a regular household battery to cause a shock. However, car batteries are powerful enough to shock, so you should never tamper with them.

    Top of Page

  20. What are those little boxes on hair dryer cords?
    Water and electric hair dryers are a dangerous combination! In the early 1980s, hair dryers falling into bathtubs or sinks filled with water caused about 18 deaths per year. Since 1991, hair dryer manufacturers have been required to include GFCIs (ground fault circuit interrupters) on dryer cords. GFCIs cut off electricity to prevent serious shock. Thanks to these devices, the number of hair dryer related deaths has dropped to an average of two per year.

    Top of Page

  21. Do electric eels really create electricity?
    Yes! An electric eel uses chemicals in its body to manufacture electricity. A large electric eel can produce a charge of up to 650 volts, which is more than five times the shocking power of a household outlet.

    Top of Page

  22. How does a defibrillator work?
    Inside the cells of the heart, tiny electrical currents fire in a steady rhythm. If that rhythm is disrupted due to disease or injury, a heart attack can occur. A defibrillator shocks every cell in the heart at the same time, so they all start up again in rhythm. It's like each cell is dancing to the same beat!

    Top of Page

  23. How does an incandescent light bulb work?
    The wire inside a light bulb is called a filament. It is made of tungsten, a metal that stays solid at very high temperatures. Electricity flows through the tungsten filament, causing it to heat up and glow. The glow gives off light. Inside a light bulb is a vacuum—in other words, all the air has been removed from inside the glass bulb. (If there was air inside, the wire would burn up.)

    Top of Page

  24. How does a compact fluorescent light (CFL) work?
    Compact fluorescent lights (CFLs) and other fluorescent light bulbs contain gases (argon and mercury vapor) that produce invisible ultraviolet (UV) light when stimulated by electricity. When the UV light hits the white phosphor coating inside the fluorescent bulb, the phosphor illuminates or “fluoresces,” changing the UV light into visible light. CFLs are very energy-efficient, using only about one-fifth the energy of a standard incandescent bulb. This is because all of the electricity they use goes toward creating light, whereas the energy used by standard incandescent bulbs creates heat as well as light.

    Top of Page

  25. How does a light-emitting diode (LED) work?
    LEDs don’t get particularly hot and thus don’t waste energy on heat. LEDs are illuminated solely by the movement of electrons in a semiconductor material. A semiconductor is a material with electrical conductivity (meaning the ability to transfer electrical energy) between that of a conductor and an insulator (hence the prefix "semi"). Inside an LED, when an electrical current passes through the semiconductor material, electrons move through the material and drop to other energy levels, and in the process, they emit photons of light. LEDs are becoming an increasingly important and common light source because of their high degree of energy efficiency. LEDs use up to 20% less energy than CFLs and up to 90% less energy than incandescent light bulbs.

    Top of Page


Next